2017 Chrysler 200 Wiper Sizes & Bulb Sizes

Last reviewed October 16, 2026

The short answer

The 2017 Chrysler 200 takes 26" driver and 19" passenger wiper blades, and uses a 9005 low-beam bulb.

Shop buttons go to Amazon. As an Amazon Associate, FitsYourCar earns from qualifying purchases; it never changes a size we list. How we make money.

Wiper blade sizes

Driver side 26" · j-hook connector Shop on Amazon
Passenger side 19" · j-hook connector Shop on Amazon

Bulb sizes

Front turn signal PWY24W Search Amazon for PWY24W bulbs
Rear turn signal W21W Search Amazon for W21W bulbs
Tail light Sealed LED, no replaceable bulb

Wheel specs and lug torque

Lug nut torque 100 ft-lbs (136 Nm)

Key fob, battery and sensors

Key fob battery CR2032 Search Amazon for CR2032
Relearn auto (drive up to 20 minutes above 15 mph)

Dimensions, weight and fuel

Fuel Gasoline
Octane 87 (regular)
Fuel tank 15.8 gal (60 L)

Worth knowing about the 2017 200

  • Connector. Both front blades use a j-hook connector. A blade of the right length with the wrong connector will not clip on, so check the connector before you buy.
  • LED lighting. The tail light is a sealed LED unit with no user-replaceable bulb. A failure means replacing the assembly.
  • Bulbs. The halogen headlamp uses one 9005 bulb for both beams; HID headlamps (D3S) are dealer-serviced.
  • Torque. Tighten lug nuts to 100 ft-lbs in a star pattern with a torque wrench, and re-check after the first 50 miles. This figure is from the owner's manual; an impact gun will overshoot it.
  • Fuel. Flex-fuel (E85) versions of both engines can also run on E85.