2017 Kia Sedona Wiper Sizes & Tire Sizes
The short answer
The 2017 Kia Sedona takes 26" driver and 18" passenger wiper blades (rear 13"), and rides on 235/65R17 tires as standard (L, LX); EX and SX use 235/60R18, SX Limited uses 235/55R19.
Some values on this page are still waiting for a second source. We show what we have and mark it; confirm against your owner's manual before you buy.
Wiper blade sizes
Driver side
26" · j-hook connector Shop on Amazon
Passenger side
18" · j-hook connector Shop on Amazon
Rear
13" Shop on Amazon
Tire sizes by trim
L, LX (standard)
235/65R17 See tires at Amazon
EX, SX
235/60R18 See tires at Amazon
SX Limited
235/55R19 See tires at Amazon
The size on the placard inside the driver's door jamb is the one your car left the factory with. Match that, not this table, if they differ; a previous owner may have changed wheels.
Wheel specs and lug torque
Bolt pattern
5x114.3 mm (5x4.5")
Lug thread
M12x1.5 Shop on Amazon
Lug seat
cone
Factory wheel sizes
17x6.5, 18x7, 19x7.5
Key fob, battery and sensors
Key fob battery
CR2032 Shop on Amazon
Replacement fob
FCC ID SY5YPFGE06 · part 95440-A9300 · 6-button · smart key Shop on Amazon
Frequency
433 MHz
Relearn
tool
Worth knowing about the 2017 Sedona
- Connector. Both front blades use a j-hook connector. A blade of the right length with the wrong connector will not clip on, so check the connector before you buy.
- Tires. No 2017 owner's manual was found, so pressures, spare and chain guidance are not given for this year.
- Wheels. No 2017 owner's manual was found, so no torque figure is given.
- TPMS. New sensors on this car need a relearn (tool); they will not pair on their own by driving.
- Key fob. Match the FCC ID (SY5YPFGE06) printed on the back of your fob when buying a replacement; the same car can use two fob designs in one year. A new fob still needs programming to the car.
- Key fob. Sedonas without the smart key use a flip key that also takes a CR2032.